Replacing an ageing ion chromatograph is not always a matter of finding a newer version of the same instrument. A laboratory may now be testing more samples, measuring substances at lower concentrations or handling materials that require additional preparation. An instrument that suited the original workload may no longer be the right choice.
The purchase decision involves more than detector specifications and price. Separation performance, sample handling, software and ongoing maintenance all affect how an instrument performs in daily laboratory work. These seven considerations help laboratory managers and chemists assess the available options against their analytical requirements and budget.
1. Choose a Detection Method That Suits the Substances Being Measured
The detector must suit the ions being measured and the concentrations the laboratory needs to determine. Suppressed conductivity detection is commonly used for anions such as chloride, nitrate and sulphate in water samples. A suppressor reduces the background electrical conductivity of the liquid carrying the sample, making the signal from the target ions easier to measure.
A laboratory analysing routine water samples alongside more complex materials may need different detection options. For ion chromatography, Metrohm supplies compact instruments for routine measurements and configurations that can be coupled with mass spectrometry when greater selectivity is required. In these coupled systems, the chromatographic column separates sample components before the mass spectrometer measures ions according to their mass-to-charge ratio.
A drinking water laboratory measuring common anions may find that conductivity detection meets its requirements. A laboratory investigating trace contaminants in difficult samples might need another detector arrangement. The supplier should demonstrate that the proposed system reaches the required detection limits using a method suitable for the samples being tested.
2. Check Whether the Column Can Separate the Target Ions
Even a suitable detector cannot compensate for poor separation. Inside the chromatograph, ions pass through a column containing material that interacts with them to different degrees. A liquid called the eluent carries them along the column, while differences in their interactions cause the ions to separate.
When substances leave the column too close together, their detector signals may overlap. This can make individual concentrations difficult to calculate, especially when one substance is present at a much higher concentration than another.
Consider an industrial wastewater laboratory measuring nitrate in samples containing high chloride concentrations. A column that separates both ions in standard solutions may behave differently when other components of the wastewater are present.
Laboratories should ask suppliers to demonstrate the separation using representative samples. Column chemistry, eluent composition and operating conditions need to suit the complete analytical method, rather than a single substance tested under favourable conditions.
3. Calculate Sample Capacity Using Actual Analysis Times
An autosampler introduces samples into the instrument in a programmed sequence, reducing the need for an analyst to perform every injection manually. This can be useful for laboratories receiving large batches of similar samples.
Yet the number of positions on an autosampler does not establish how many samples a laboratory can analyse each day. The duration of each separation, calibration procedures and the frequency of check standards all affect the working schedule.
An environmental laboratory receiving dozens of water samples each afternoon might benefit from overnight analysis. The laboratory still needs to confirm sample stability, sufficient eluent and waste capacity, and how the software handles results that fall outside the accepted measurement range.
For unattended operation, laboratories should establish what happens when an analytical check fails halfway through a sequence. The software should make it possible to identify affected samples, review the reported errors and determine whether analysis can continue.
4. Identify Which Sample Preparation Steps Can Be Automated
Samples containing suspended particles or high concentrations of dissolved substances may need treatment before analysis. Filtration removes particles that could obstruct the column or tubing, while dilution brings concentrations within the method’s calibrated range.
Inline sample preparation incorporates certain operations into the instrument’s sample handling sequence. Depending on the installed modules, this may include automatic filtration, dilution or other treatments that would otherwise be carried out manually.
In industrial wastewater testing, analysts may need to filter and dilute samples individually. A compatible system with inline filtration and dilution can incorporate both operations into the analytical procedure, reducing the amount of manual preparation.
The laboratory must still establish whether the preparation method affects the substances being measured. Sample recovery, cross-contamination between successive samples and the accuracy of dilution should be assessed using representative material. Automation is useful only when the resulting measurements meet the laboratory’s acceptance criteria.
5. Confirm That the System Supports the Required Method and Records
A laboratory working to a published testing standard needs an instrument configuration that supports the specified analytical procedure. Detector capability alone does not establish that a method can be performed satisfactorily.
For water analysis, BS EN ISO 10304-1 in the UK and its Irish equivalent, I.S. EN ISO 10304-1, cover the determination of selected dissolved anions by ion chromatography. A laboratory using either standard should examine the specified measurement conditions and establish that the proposed system can produce suitable results for its samples.
Software also affects how results are documented. Laboratories working under ISO/IEC 17025 accreditation may need access controls, calibration records and traceable information about changes to analytical methods and results. The precise arrangements depend on the laboratory’s procedures and testing obligations.
A laboratory introducing a replacement instrument should ask how existing methods and records will be transferred. It must also establish whether method verification or further validation is necessary. These activities assess whether the laboratory can obtain results suitable for the intended testing purpose.
6. Consider the Complete Equipment Cost and Available Space
The instrument price is only one part of the laboratory’s expenditure. Separation columns, eluents, calibration standards, filters and replacement components contribute to running costs. Maintenance and the time analysts spend preparing the instrument should also be considered.
Space can influence the configuration. A compact system may fit on an existing bench, but the complete installation may require an autosampler, reagent containers, waste collection and a computer.
A laboratory performing the same anion analysis each day may need only a single-channel instrument. Another laboratory planning to add cation testing should examine whether the system can accommodate additional separation channels or detectors.
The supplier should explain which components are included in the quotation, the expected replacement intervals for consumables and the options for later expansion. This helps the laboratory distinguish between a system that meets its present requirements and one that would need replacing when the analytical workload changes.
7. Establish What Installation, Training and Service Involve
An instrument purchase also introduces responsibilities for installation, maintenance and analyst training. These become more demanding when a laboratory is transferring established methods or adopting a technique its chemists have not previously used.
A laboratory replacing an older chromatograph should ask whether the supplier supports method transfer and can help investigate differences between results obtained on the two systems. Changes in columns, detectors or operating conditions may require additional checks before the new instrument enters routine use.
Service arrangements deserve attention. Laboratories in the UK and Ireland should establish how repairs are requested, where replacement parts are supplied from and what technical assistance is available for software and analytical problems.
Training should cover more than operating the instrument. Analysts need to understand calibration, peak identification, column care and the signs of poor separation. They should also know when a result requires further investigation rather than being accepted automatically.
A supplier demonstration using the laboratory’s own samples can reveal practical differences that are easy to miss in an equipment quotation. Analysts can assess how long a complete batch takes, which preparation steps still require manual work and whether the proposed configuration suits their testing routine.
These findings, considered alongside running costs and written service arrangements, help the laboratory choose a system that meets its analytical requirements without adding unnecessary work.
